Skip to content
Sections
Personal tools
You are here: Home » Discussion Forums » Technical » Measuring Deck Heights
 

 • Measuring Deck Heights

Document Actions
Replies: 1   Views: 628
Up one level
You need to be a registered member to post to this forum. Register now.
Prev topic | Next topic

 • Measuring Deck Heights

Posted by srdracing at 07-05-2008 20:09
Hi all,

I'm currently in the process of re-building the top end of my 1200 and i am trying to get the deck heights as close to 1mm as possible but i don't seem to be getting consistant measurements. I am using a good quality digital vernier caliper to measure the height but i'm not sure the best way to set the barrels in to get an accurate and consitant measurement.

Any help would be great

Thanks
Member
Posts: 4

 • Re: Measuring Deck Heights

Posted by daniel at 08-05-2008 20:55
You need to bolt a thick and flat piece of steel to the top of the barrells and clamp the vernier's to the steel (at 90deg). Talk to your engine sealer, they may lend/help you with a tool.
Member
Posts: 10