Skip to content
Sections
Personal tools
You are here: Home » Discussion Forums » Technical » H-beam U bolts and roll bars

 • H-beam U bolts and roll bars

Document Actions
Replies: 1   Views: 1796
Up one level
You need to be a registered member to post to this forum. Register now.

 • H-beam U bolts and roll bars

Posted by mwoodland at 06-06-2006 15:44
Hello all,

Can anyone suggest a source for U bolts for attaching the H-beam to the chasis? I seem to be having some trouble tracking some down here in little old Adelaide.

Also, I am makingup a new roll bar for the lower tube in the H-beam. What is the current thinking as far as the bar diameter goes? My old one appears to be about 15mm OD. Are they normally heat treated in any way before use?

Thanks for you help.

Matt
Member
Posts: 4

 • Re: H-beam U bolts and roll bars

Posted by Vpilot53 at 08-06-2006 03:39
Gday Mate

Are you talking about a sway bar for your h-beam? If so if you have a link pin front end i have got one you can buy. If it's for a Ball Joint Front end you are better off buying one. If you email me there is a guy in Victoria that makes them i can give you his information. You are better off just buying a sway bar than stuffing around making one thay are really not that expensive.

Andre
email: vpilot@optushome.com.au
Member
Posts: 4