Skip to content
Sections
Personal tools
You are here: Home » Discussion Forums » Technical » Oil cooler holes (original)
 

 • Oil cooler holes (original)

Document Actions
Replies: 2   Views: 869
Up one level
You need to be a registered member to post to this forum. Register now.
Prev topic | Next topic

 • Oil cooler holes (original)

Posted by plantm at 07-01-2008 10:06
Hi all

I have a question about the hole where the original oil cooler mounts. Can they plugged up? I have two engines. One with a modified oil cooler base which mounts in the original position and one that has the holes blockes up with bolts. Any advice?

If you have a pic of you solution to this please post.

Cheers
Michael:zz:
Member
Posts: 7

 • Re: Oil cooler holes (original)

Posted by Morganf at 24-01-2008 15:51
Re: Oil cooler holes (original)
G'day Michael

Generally motors have a blocking plate accross the cooler holes as most cases are converted for full flow and have an external cooler.
Member
Posts: 3

 • Re: Oil cooler holes (original)

Posted by Morganf at 24-01-2008 16:01
Re: Oil cooler holes (original)
G'day Michael

Generally motors have a blocking plate accross the cooler holes as most cases are converted for full flow and have an external cooler.

Hope the rebuild id coming along well.

Cheers

Morgan
Member
Posts: 3